Innovative
engineering can reduce waste handing costs up to 75% by shredding
Shredding
is the proven means of increasing weight in containers...thus cutting
haul-away costs by reducing the number of times containers must be taken
to a disposal site.
Your costs are further reduced because boxes, crates or pallets go DIRECTLY
INTO THE SHREDDER. There is no need for an operator to knock-down the
boxes or break up crates or pallets.
The
heart of BloApCo systems is the patented, low-horsepower, pierce-and-tear
shredder. These shredders incorporate three or more shafts with ripper
teeth. Each shaft rotates at a different speed, from 3 to 35 RPM, creating
the highly efficient pierce-and-tear action. Because of the low RPM, the
shredder operates with a very low noise level and creates a minimum of
dust -- and throw-out of shredded pieces is virtually eliminated.
The Unique Approach
BloApCo engineers realize that your waste handling needs are unique
to your organization. Drawing upon experience gained in designing and
installing thousands of successful systems throughout the world, we
create a specific system to solve your problem.
High-torque,
low-speed action, combined with pierce-and-tear shredding, make BloApCo
the quietest pallet shredder with an acceptable noise level at normal
feed speeds. These same factors of low-speed, high-torque action and
pierce-and-tear shredding hold dust generation to a minimum.
Each
system must meet the following criteria:
1. The system must be sized correctly to handle present and anticipated
volume.
2. The system must reduce waste to appropriate size for lowest
practical disposal cost.
3. The system must provide for separation of waste if portions
of waste product have a resale value.
4. The system must "size and package" waste for highest resale
value. 5. The system must be automated to the level which assures
the most efficient and economical use of manpower.
6. The system must be compact in order to utilize minimum height
and floor space.
