Dimensions
The BloApCo Model 5TOB / SC may be mounted on rails and connected to a BloApCo Model 25-4 Trim Fan as shown here. This configuration facilitates installation in many cases.
large image Note: This trim cutter, operating in a pneumatic system, will generate a certain amount of noise. The intensity and volume of sound produced varies greatly with the service and is not easily tabulated. Mufflers are available for installation in the ducts, connecting to the trim cutter, and these are generally sufficient to keep the noise within OSHA guidelines. A Model 5SC is quieter than a 5TOB because it utilizes a shear cut. Please refer questions regarding this point directly to our Engineering Department.
Bulletin 881
