For clarity, the required
inlet and outlet fittings are not shown. For safe operation to prevent
personnel from reaching into the fan blade area, it is mandatory that
fitting of sufficient length be installed as a part of the operating system.
Noise
Any
fan operating in a pneumatic handling system will create a certain amount
of noise. The intensity and volume of sound produced is not easily calculated.
BloApCo duct silencers are available to reduce air conducted noise. The
addition of silencers is generally sufficient to keep the noise within
OSHA guidelines.
Optional Equipment
Trim
cutters to cut continuous ribbon of paper, film, foil, brass, copper,
aluminum foils and light gauge metals.
Cyclones
to separate the conveying air from the scrap material.
Unique
diverter "bucket" valve -- pressure or suction side -- allows
for a fast, positive change in scrap flow |
|
