Dimensions
larger version
The BloApCo Model 3B Trim Cutter may be mounted on rails and connected to a BloApCo Model 15 design Trim Fan as shown here. The configuration facilitates installation in many cases.
larger version
Note: This trim chopper, operating in a pneumatic system, will generate a certain amount of noise. The intensity and volume of sound produced varies with the service and is not easily tabulated. Mufflers are available for installation in the ducts, connecting to the trim cutter, and these are generally sufficient to keep the noise within OSHA guidelines. Please refer questions regarding this point directly to our Engineering Department.
Bulletin 882
