Custom Fans
Special fan wheels manufactured from 304 or 316 stainless steel, can be provided for special applications. Wheels can be hard faced if required. Fan housing would be altered to match changes in fan wheel. For more information see our Material Handling Fan Bulletin.
Typical applications: Magazines, Metals, Plastics, rapid destruction of bulky or hard to handle materials Publication & Book Destruction.
Custom Features:
• Custom Fan Blades
• Abrasion resistant materials available
• Custom housings
• Custom inlet size
• Custom wheel profiles
All fan data and curves are rated at standard air: (GT).
075 lbs/cubic ft.; 70 degrees F at sea level. Therefore, when operating at elevations and temperatures other than these, adjustments to the fan performance curves must be made. Be sure that you tell us the elevation of the plant and the near temperature -- especially for the system for plants 1,000 ft. above sea level. At higher elevations more CFM of air is required to keep the same weight of air flowing in the system. To maintain the same velocity pressure in the air stream it is necessary to have the air flowing at greater velocity. At higher elevations it may also be necessary to use large ducts to accommodate the greater volume of air without going to excessive velocities and their resultant pressure losses.
 |
|
|
|
 |
|
||
 |
 |
 |
|
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
Download our Material Handling Fan Bulletin as a .pdf file
