SHRED - WOOD PALLETS - PLASTIC - PAPER - GLASS -
CORRUGATED - METAL – FIBERGLASS

BloApCo shredders and trim cutter products are two main categories of scrap size reduction and handling systems. Each shredder and trim cutter has been engineered to accommodate the unique properties of certain materials. Each application is designed to become an integral part of your scrap material size reduction and removal system.

The shaft design spreads impact over the entire shaft producing a wider shredding action with more capacity using less horsepower. Energy costs are significantly lower than any other waste reduction method

BloApCo shredders are being used to process corrugated paper, polycoated paper, wooden pallets, 50-gallon drums and 8-by-8-inch blocks of wood. BloApCo shredders can handle a corrugated box a second; a stack of eight plastic molded chairs takes 15 seconds and a nest of several (more) fiberglass hulls or decks for water jet skis takes about a minute to destroy. Our largest shredders, using the same patented "Pierce-and-Tear" ripping action, can shred entire car bodies and chassis, including the engine block.

Choose the type or types of material that best describe those found in your operation to link to application reports about solutions that have been used in operations similar to yours; paper, foil, light metal, wood pallets and skids or plastic.

Engineered Cutter wheel Designs
To achieve the most efficient shredding, a variety of ripper wheel configurations are available to match specific requirements

The ripping wheels provide years of service life, never requiring sharpening and are individually replaceable. The ripper wheels are bolted in halves and keyed to adjacent wheels forming a spiral pattern along the shaft

All BloApCo shredders use our patented "Pierce-and-Tear" shredding concept. Ripping teeth, mounted on three shafts, counter-rotate at different speeds and tears it apart into irregular-sized pieces which can be conveyed easily into hoppers or deposited into balers, packed into refuse hoppers or into self-contained energy-generating systems.

FEATURES

BloApCo shredders offer several unique advantages, setting them apart from competitors:
• Low energy consumption: It requires much less horsepower to tear apart scrap than it does to cut, beat or shear, lowering operating cost.
• Less noise: High torque and low speeds provide BloApCo with the quietest shredder available operating below 80 dB.
• Less dust: Pulling the material apart at very slow speeds produces minimal dust, prevents throw-outs and eliminates potential fires.
• Less maintenance: “Pierce-and-Tear" technology utilizes low RPM ripping shafts that eliminate machine vibration, giving the longest component wear life of any shredding technology.
• Safety devices: include automatic jog reverse and overload relays and a safety overweight plate built into the head end of the infeed conveyor, cutting power whenever loads over 60 to 80 pounds reach the area.