Features, Capabilities and Options

FEATURES

• Rotor-mounted knife-adjustment
  screws for fast, easy setups
• Multiple knives: HCHC and NEOR
• Class "O" tapered roller bearings to
  eliminate endplay and runout
• Rotor shaft supported by tapered roller
  bearings maintains rotor stability for long life
• Multiple drive arrangements: V-belt,
  direct drive and gear motor
• Open rotor design facilitates
  passage of air and material
• Multiple mounting arrangements
• Flanged inlet and outlets
• Multiple inlet positions.
• 1 HP 3/60/460 volt TEFC motor standard

CAPABILITIES

Materials	Light paper, plastic film and foil
Trim Width max	63/4" (176 mm)
Caliper Range	1 mil to 20 mil 0.00100" to 0.02000" 0.0254 mm to 0.508 mm
Air Capacity	1,000 cfm, 1,700 m3/hr
Static Pressure Loss	1.5" wg. @ 5,000 fpm air velocity
Drive	V-Belt or Direct Drive
Cutting Action	Shear
Rotor Speed	500 to 2,000 rpm
Weight	145 lbs. (66kg) with motor
Dimensions L x W x H:	L x W x H: 18" x 131/4" x 215/8" (457.2 mm x 336.5 mm x 549.3 mm)

OPTIONS

• Oil mist unit
• Safety disconnect switch
• Direct or gear motor drive
• Tandem rail mounting with
  BloApCo material-handling fans