 Features,
Capabilities and Options
FEATURES
- Rotor-mounted adjustment screws, easy setup
- Multiple knives: T-15, NEOR
- Class "O" tapered roller bearings
eliminate endplay and runout
- Rotor shaft supported by tapered roller
bearings maintains rotor stability for long life
- Open-rotor design facilitates
passage of air and material
- Multiple mounting and drive arrangements
- Multiple flanged inlet, slip-fit outlet positions
- 5 HP 3/60/460-volt TEFC motor is standard
CAPABILITIES
| Materials |
Paper, film, heavy corrugated and fiber board, light
metal foils |
| Trim Width max |
13" (330.2 mm) |
| Caliper Range |
3 mil to 250 mil
0.00300" to 0.25000"
0.0762 mm to 6.350 mm |
| Air Capacity |
4,500 cfm 7,650 m3/hr |
| Static Pressure Loss |
1.5" wg. @ 5000 fpm air velocity |
| Drive |
V-Belt or Direct Drive |
| Cutting Action |
Impact |
| Rotor Speed |
500 to 2,000 rpm |
| Weight |
440 lbs. (200 kg) with motor |
Dimensions
L x W x H: |
27 3/4" x 22" x 34 3/4"
(704.9 mm x 558.8 mm x 882.7 mm) |
OPTIONS
- Oil mist unit
- Flywheel
- Gear motor drive
- Safety disconnect switch
- Tandem rail mounting with BloApCo material-handling fan
|
